Basic Info
Model NO.: MVR / MV
Working Pressure: Low Pressure Pump
Position of Pump Shaft: Vertical Pump
Mounting Height: Suction Centrifugal
Usage: Pump
Sump Pump Material: Natural Rubber
Sump Pump Shaft Seal: No Shaft Seal
Specification: CE ISO9001
HS Code: 8413701090
Impeller Number: Single-Stage Pump
Influent Type of Impeller: Single Suction Pump
Pump Casing Combined: Verticaljoint Surface Pump
Impeller: Open
Sump Pump Size: 40-250mm
Sump Pump Character: Handling Corrosive Slurry
Trademark: MODO
Origin: ChinaProduct Description
This type of pump is vertical, centrifugal slurry pump which submerged in sump to work. The bearing assembly allows the pump to operate in the "snore" condition without damage to the bearings. It is designed for handling abrasive slurries and corrosive fluids achieved by using either elastic or alloy lined wet ends components. The pump is suitable for mining, chemical and general process applications.
Product feature:
The parts immersed in liquid can be wear resistant metal or rubber
No any of shaft seal
Can be run in insufficient suction duties
Pump Type | Pump Model | Size | Flow | Head | Application | Feature |
MV/MVR Vertical Sump Pump | 40PV-MV | 40 - 250mm | 17-1000 m3/h | 4-40m | –Mineral Processing | –Fully elastomer lined or hard metal fitted |
65QV-MV | –Coal Preparation | –Double suction semi-open impeller | ||||
100RV-MV | –Chemical Processing | –No submerged bearing or packing | ||||
150SV-MV | –Effluent Handling | –Optional recessed impeller and suction agitator available | ||||
200SV-MV | –Sand and Gravel | –MVR models feature full rubber covering for corrosion resistance | ||||
250TV-MV | –Waste Water | –Can be run in insufficient suction duties |