Basic Info
Model NO.: MV, MVR
Slurry Pump Character: Handling Corrosive Slurry
Slurry Pump Shaft Seal: No Shaft Seal and Flushing Water
Specification: ISO 9001, CE
HS Code: 8413701090
Slurry Pump Size: 65 mm
Slurry Pump Wet End Material: Elastomer, Natural Rubber
Trademark: MODO
Origin: ChinaProduct Description
1.1 Product Introduction:
The MV/MVR heavy duty sump pump is designed for applications requiring greater reliability and durability. The bearing assembly allows the pump to operate in the "snore" condition without damage to the bearings. It is designed for handling abrasive slurries and corrosive fluids by using either elastomer or alloy lined wet ends components. The pump is suitable for mining, chemical treatment, waste water treatment, gravel and general process application.
1.2 Notation:
1.3 Product Features:
-Fully elastomer lined or hard metal fitted
-Double suction semi-open impeller
-No submerged bearing or packing
-Optional recessed impeller and suction agitator available
-MVR models feature full rubber covering for corrosion resistance
-Can be run in insufficient suction duties
1.4 Pump Construction:
1.5 Application Range:
Size: 40 to 250mm
Capacity: 17 to 1000 m3/h
Maximum head: 40m
1.6 Pump Selection Chart:
| Pump Type | Pump Model | Size | Flow | Head | Application | Feature |
| MV/MVR Vertical Sump Pump | 40PV-MV | 40 - 250mm | 17-1000 m3/h | 4-40m | –Mineral Processing | –Fully elastomer lined or hard metal fitted |
| 65QV-MV | –Coal Preparation | –Double suction semi-open impeller | ||||
| 100RV-MV | –Chemical Processing | –No submerged bearing or packing | ||||
| 150SV-MV | –Effluent Handling | –Optional recessed impeller and suction agitator available | ||||
| 200SV-MV | –Sand and Gravel | –MVR models feature full rubber covering for corrosion resistance | ||||
| 250TV-MV | –Waste Water | –Can be run in insufficient suction duties |