High Pressure Multistage End Suction Pump (MQE, MQH,)

Basic Info
  • Model NO.: IH

  • Position of Pump Shaft: Horizontal

  • Size: as Per Model

  • Specification: 1pc

  • HS Code: 8413709990

  • Pressure Medium: Water

  • Certification: ISO

  • Trademark: longway

  • Origin: China

Product Description

Max casing  pressure; Up to 48bar
Position of pump shaft; Horizontal pump
Flow; up to 340m3/hour (1600 GPM)
Head ; up to 500m (1640feet)
Max water temperature; 120 degree celsius
Pump speed;1450-2950/50hz
Material ; cast iron, stainless steel
Voltage; 220v,380v,400v,415v,440v,480v
Frequency; 50hz, 60hz
Market; Europe, USA, Middle east, Australia.
South America.
Pump size; 1.5" - 5"
OEM and ODM ; available.
Impeller no; Multistage pump
IMpeller; closed type.

Specification sheet
size                         discharge (mm)    suction(mm) ,capacity (m3/h)
MQ40A                           40mm                    65mm        30(50hz),36(60hz)
MQ40B                           40mm                    65mm        42(50hz),50(60hz)
MQ65A                           50mm                     65mm       70(50hz),80(60hz)
MQ65B                           50mm                     65mm       90(50hz).110(60hz)
MQ100A                         100mm                   125mm    150(50hz),180(60hz)
MQ100B                         100mm                   125mm    200(50hz),240(60hz)
MQ125A                          125mm                 150mm   240(50hz),280(60hz)
MA125B                           125mm                 150mm   300(50hz)  360(60hz)

Handled liquids:
Pure as well as slightly contaminated media
such as cold and hot water (temperature
up to 120 degree Celsius.) ,condensate, oil 
suspensions ,acids as well as their watery solutions
,caustic solutions and brine

Pump Applications
water supply
booster systems
fire fighting 
snow making
cooling circuits
boiler feed
district heating
osmosis and ultra filtration
spray water system
cleaning systems 

Horizontal Multistage pump introduction TYpe MQE
We introduce this pump technology from Europe.
with end suction type, discharge outlets radially
upwards.drive end at discharge side, thrust bearing
at drive side, grease lubrication, medium lubricated
slide bearing between first and second stage, Inducer
design abailable for low NPSH applications.

Horizontal configuration with outer beraings on boths.
Driven by electric motors. combustion engines or steam 
turbines via flexible coupling
Drive end discharge.clockwise rotation
Branch directions; suction left viewed from drive end, discharge
radially upwards,branches can be adjsuted to meet custom 
requirements in 90 increments.
Drive end thrust bearing, double row bearing,suction side
ball bearing, grease lubrication with grease nipples.
Thermal expansion of the pump rotor will be balanced
internally without affecting the shaft alignment.
Shaft sealing arrangements (mechanical seal or gland packing)
Bearing and shaft seal are maintainable without pump disassembly.
Our multistage pump  with more than one discharge are

Pumps with more than one discharge -Multioutlet design;
Multistage pumps in Mulitoutlet design can be fitted with 
a random number of discharge branches, the pumps are
mostly used in fire fighting applications to serve different
pressure zones with different pressure levels
multioutlet configurations are available for all horizontal
and vertical MQ designs.