High Quality Swimming Pool Pump of Submersible Sewage

Basic Info

  • Material: Cast Iron

  • Assembly: Booster Pump

  • Start Up: Electric Pump

  • Application: Submersible Pump, Clarified Water Pump, Sewage Pump, Slurry Pump, Oil Transfer Pump, Chemical Pump

  • Media: Sewage Pumps

  • Theory: Mixed Flow Pump

  • Capacity: 1884-3266

  • Medium Temprature: Less Than 50 Degree Centigrade

  • Leakage Protection: with Sensor to Protect

  • Specification: SGS

  • HS Code: 8413709190

  • Structure: Single-stage Pump

  • Power: Electric

  • Type: Blade Pump

  • Industry: Mechanical Pump

  • Performance: Explosion-Proof Pumps

  • Diameter: 500

  • Shaft Seal: 2 or 3 Mechanical Seal Ring

  • Motor Protection Class: IP68

  • Trademark: Zhongxing

  • Origin: Taixing Jiangsu

Product Description

High Quality Swimming Pool Pump Of Submersible Sewage

The QZB series of submersible axial-flow pump is a kind of electromechanical product featuring an integration of motor and mixed flow pump. It has replaced the traditional dry type mixed-flow pump and has been one of main equipments in submersible pump station. At the same time, submersible pump station has been developing rapidly due to easy civil engineering, low project cost, convenient maintenance, simple installation and other advantages.
There are some features in this pump:

The total amount of investment in the pump station will be reduced by over 30%;
The period of construction can be shortened by over 40%;
The unit installation time will be saved by about 95%;
Investment in pump station flood control wall is omitted;
Lower maintenance expenses.
In view of the above, the pump is fit for the following cases:
Rainwater and light sewage discharged by municiple works;
Water transfer projects in water servancy;
Industrial processing and cooling water;
Farmland irrigation and drainage.
800: Nominal diameter;
QZB: Submersible axial-flow pump;
       General drawing of QZ submersible pump

 1.wiring box cover                   9.leakage alarm device
 2.top-end cover                      10.bottom-end cover
 3.leakage alarm device         11.upper mechanical seal
 4.upper bearing                      12.electrode probe
 5.thermal protection device   13.lower mechanical seal
 6.stator                                     14.guide vane
 7.rotor                                       15.impeller parts
 8.lower bearing                       16.water inlet bell mouth

Here are some pictures in the factory

   Protection devices as followings:
 JS  Submerged sensor  Inside the upper wiring chamber  Switching signal 
 WC  Winding temperature sensor  Inside the motor winding  Thermoswitch signal   
PT100 platinum resistance signal
 XL    Leakage sensor  Inside the motor chamber   Switching signal  
 YS  Temperature sensor   Inside the oil chamber  Analog signal  
WZ  Lower bearing temperature sensor  Inside the lower bearing chamber  Thermoswitch signal  
  PT100 platinum resistance signal