Basic Info
Model NO.: 100D-ML
Max.Capacity: 300-400 L/min
Impeller Number: Single-Stage Pump
Influent Type of Impeller: Single Suction Pump
Pump Casing Combined: Horizontal Split Pumps
Impeller: Open
Slurry Pump Size: 100 Mm
Slurry Pump Wet Component Material: High Chrome White Iron
Trademark: MODO
Specification: ISO 9001, CE
HS Code: 8413701090
Max.Head: 110m-150m
Driving Type: Motor
Working Pressure: Low Pressure Pump
Position of Pump Shaft: Horizontal Pump
Mounting Height: Suction Centrifugal
Usage: Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump
Slurry Pump Character: Handling Low Abrasive Slurry with High Density
Slurry Pump Shaft Seal: Mechanical Seal/Gland/Centrifugal Seal
Transport Package: Plywood Case
Origin: China
Product Description
1.1 Products Introduction:
Pump type MM is the standard middle duty slurry pump which designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements. Pump type ML is the standard light duty slurry pump which designed for the continuous pumping of light abrasive, light density slurries with minimal maintenance requirements. They maintain high efficiencies over the wear life of its components and typically used in process plant transfers, wet waste processes, recycling-washing plants, sand plant duties, heavy minerals processing, mineral recovery and chemical process plant.
1.2 Notation:
1.3 Product Features:
-Wear resistant metal or rubber wet end parts, long service life
-Wide options for impeller
-Various types of pump seals to suit different working condition
-Grease or oil lubrication
-Discharge branch can be positioned at intervals of 45 degree
-Can be installed in multistage series
-Easy to maintain
1.4 Pump Construction:
1.5 Application Range:
Size range (discharge): 20 mm to 650 mm
Capacities: to 10,225 m3/hr
Heads: to 55 m
1.6 Pump Selection Chart:
Pump Type | Pump Model | Size | Flow | Head | Application | Feature |
MM/ML Medium Duty Slurry Pump Light Duty Slurry Pump | 20A-ML | 20 - 650mm | 3-12000 m3/h | 4-60m | -Ball Mill Discharge | -Wear resistant metal or |
50B-ML | -Rod Mill Discharge | rubber wet end parts | ||||
75C-ML | -Coarse Sand | long service life | ||||
100D-ML | -Coarse Tailing | -Wide options for impeller | ||||
150E-ML | -Mineral Concentrate | -Various types of pump seals | ||||
10/8E-MM | -Heavy Media | to suit different working condition | ||||
10/8F-MM | -Coal | -Grease or oil lubrication | ||||
10/8R-MM | -Flotation | -Discharge branch can be | ||||
12/10F-MM | -Fine Tailing | positioned at intervals of 45 degree | ||||
300S-ML | -Process Chemical | -Can be installed in multistage series | ||||
350S-ML | -Pulp and Paper | -Easy to maintain | ||||
400ST-ML | -FGD | |||||
450ST-ML | -Waste Water | |||||
550TU-ML | -Oil Sand |