Basic Info
Model NO.: 6/4D-MAR
Max.Capacity: 300-400 L/min
Impeller Number: Single-Stage Pump
Influent Type of Impeller: Single Suction Pump
Pump Casing Combined: Horizontal Split Pumps
Impeller: Closed
Slurry Pump Size: 4 Inch
Slurry Pump Material: Natural Rubber, Nitile, Neoprene, Butyl Rubber
Trademark: MODO
Specification: ISO 9001, CE
HS Code: 8413701090
Max.Head: 80-110m
Driving Type: Motor
Working Pressure: Low Pressure Pump
Position of Pump Shaft: Horizontal Pump
Mounting Height: Suction Centrifugal
Usage: Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump
Slurry Pump Character: Acid Resistant, Wear Resistant
Slurry Pump Shaft Seal: Centrifugal Seal, Gland Seal, Mechanical Seal
Transport Package: Plywood Case
Origin: Hebei China
Product Description
1.1 Product Introduction:
MA series slurry pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, chemical and general industry applications. The horizontal slurry pumps are designed for heavy duty applications such as mill discharge, power sector and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density slurry.
1.2 Product Features:
-Wear resistant metal or rubber wet end parts, long service life
-Wide options for impeller
-Various types of pump seals to suit different working condition
-Grease or oil lubrication
-Discharge branch can be positioned at intervals of 45 degree
-Can be installed in multistage series
-Easy to maintain
1.3 Technical Parameters:
Size: 25 mm to 450 mm
Capacity: Up to 5000 m3/hr
Maximum Heads: Up to 75 m
| Pump Type | Pump Model | Size | Flow | Head | Application | Feature |
| MA/MAR Heavy Duty Slurry Pump | 1.5/1B-MA | 1"-18" | 4-5400 m3/h | 5-75m | -Ball Mill Discharge | -Wear resistant metal or rubber wet end parts, long service life |
| 2/1.5B-MA | -SAG Mill Discharge | |||||
| 3/2C-MA | -Rod Mill Discharge | |||||
| 4/3C-MA | -Coal Washing | -Wide options for impeller | ||||
| 4/3D-MA | -Coarse Sand | -Various types of pump seals to suit different working condition | ||||
| 6/4D-MA | -Coarse Tailing | |||||
| 6/4E-MA | -FGD | -Grease or oil lubrication | ||||
| 8/6E-MA | -Fine Tailing | -Discharge branch can be positioned at intervals of 45 degree | ||||
| 8/6F-MA | -Flotation | |||||
| 10/8F-MA | -Heavy Media | -Can be installed in multistage series | ||||
| 10/8ST-MA | -Mineral Processing | -Easy to maintain | ||||
| 10/8G-MA | -Mineral Concentrate | |||||
| 12/10F-MA | -Pulp and Paper | |||||
| 12/10ST-MA | -Process Chemical | |||||
| 12/10G-MA | -Oil Sand | |||||
| 14/12F-MA | -Mineral Sand | |||||
| 14/12ST-MA | -Pulp and Paper | |||||
| 14/10G-MA | ||||||
| 16/14TU-MA | ||||||
| 20/18TU-MA |