Impeller Number: Single-Stage Pump
Position of Pump Shaft: Horizontal Pump
Capacity: 5.7~400 M3/H
Liquid: Corrosive Liquid or Liquid Without Solid Granules
Transport Package: Plywood Case
Influent Type of Impeller: Single Suction Pump
Pump Casing Combined: Horizontal Split Pumps
Head: 5~125 M
HS Code: 8413709990
IH Model chemical pump is single-stage end suction-(axial suction c)antilever type centrifugal pump, which is used to transport corrosive liquid with viscosity similar to water and without solid particles. the marked and rated performances and dimensions adopt ISO 2858 international standard. It has such characteristics as wide range of performance high effciency,,high mechanical, chemical and physical level and convenient maintenance etc. it is energy saving type product recommended by the nation with its effciency being 5% greater than that of F model pump.
The temperature of transported media of IH model chemical pump is 20oC-~105oC. Through adopting cooling method, it can transport media with higher temperature if necessary, and is applied to transport various corrosive media or media in which pollution is forbidden similar to water in such industries as chemical industry petroleum,,metallurgy ele,tricC power papermaking,,food pharmacy, and synthetic fiber etc.
RANGE OF PERFORMANCE
Rotation Speed 2900:/1450rpm; Power of fitted motor 0:.55~110kw; Inlet diameter 50:~200mm
The highest work pressure 1:.6Mpa;
IH model pumps are classified as 29 basic types among which,,22 two speed-
2900(/1450rpm)types being transformed after trimming the impeller diameter to be A and B models, the total
specifications can be 112.
1. IH model pumps are the series of products designed according to ISO international standards in all industries in China. It is mainly composed of pump body impellers,,seal rings impeller nuts,,pump cover seal,parts, intermediate support spindle,,suspended parts and so on.
2. Structure features: the pump cover is fixed on the intermediate support, and the pump cover is clamped in the middle by coupling between pump body and intermediate support On the pump body.,water is input axially and output radially, Support feet can be fixed on the base directly. The suspended parts are fixed onto the intermediate support through the rabbet, and are supported onto the base by suspended frame. To make it convenient to disassemble, the prolonged coupling is designed so that it is unnecessary to disassemble the coupled input & output pipes during check and maintenance. To pump body and motor, only by disassembling the intermediate coupler of the prolonged coupling, users are able to screw out rotor parts for check and maintenance, which is a conventional structure pattern in the world.
3. Rotation direction: the pump is driven by motor directly through a prolonged coupling, seen from the side of the motor, it rotates clockwise.
4. Shaft seal patterns: shaft seal patterns of pump are two types such as packing seal and mechanical seal. The packing seal is that on stuffing box in pump cover, with soft stuffing packing for sealing, input water of a certain pressure into the stuffing box, for cooling lubrication and cleaning on seal,; mechanical seal is of two types such as single face mechanical seal and double--face mechanical seal, input water of a certain pressure into the seal chamber, for washing and cooling on the abrading surface.
We would like to say:
We've been in pump line for over 50 years, providing professional pump solutions for municipal, commercial, industrial and residential market, etc.
Your esteemed company can rely on our professional team to give you the best solutions for your projects.
Welcome to inquire about the IH Chemical pump!