Model NO.: AH/HH
Working Pressure: Middle Pressure Pump
Position of Pump Shaft: Horizontal Pump
Mounting Height: Since Irrigation Centrifugal Pumps
Drive Mode: Electric Drive and Diesel Drive
Accessories: with Connection Pipe/Adapter
Seal: Packing Seal and Mechanical Seal
Pump Type: Centrifugal Slurry Pump
Head: 4-118 M
Specification: CE, SGS, ISO9001
HS Code: 8413709990
Impeller Number: Single-Stage Pump
Influent Type of Impeller: Single Suction Pump
Pump Casing Combined: Horizontal Split Pumps
Size: 1 Inch to 20 Inch
Transmission Model: Direct Connection and Belt Pulley Connection
Liner: Metal Lined and Rubber Lined
Capacity: 2.34m3/H to 9108 M3/H
Trademark: MODO PUMP
Origin: ShanghaiProduct Description
We are professional manufacturer for Sand suction dredge, dredger,dredge,dredging pump for mining and river with high and stable quality, and we have made many water pump solutions for many customers.
Elastomer-lined; Durable; Efficient slurry pump
The largest one in China
NZJ-Series Centrifugal Slurry Pump
1. Uses and Features:
NZJ-Series slurry pumps are suitable for pumping slurry with hard particles and in high density in industrial sectors as of metallurgy, mining, coal, power generation and building material. These pumps can also be applied multi-staged in series. They are classified into three types: M. AH. HH.
The M. AH. HH type slurry pumps are those of cantilever, horizontal and centrifugal slurry pumps, whose shafts can be sealed by packing seals or by centrifugal type seals. The positions of the pump outlet can be positioned at an interval of 45°according to different requirements, so eight different angles can be applied by rotation in installation.
The M. AH type slurry pumps have pump bodies (volute liners, front and back liners) that consist of replaceable wear-resistant metal liners or wear-resistant rubber liners, and impellers can also apply wear-resistant metal material or wear-resistant rubber material. The HH type slurry pumps only apply wear-resistant metal material as their pump bodies and impellers.
3. Structural Image:
NZJ-Series slurry pumps are suitable for severe slurry conditions with coarse particles and high competency.
3.1 There are two types of material for wet parts (volute liners, front and back liners, impellers):
L Made of high-chrome alloy material;
L Made of highly wear-resistant rubber material researched and developed by Naipu company.
Both of them can fulfill the task of slurry pumping with high efficiency and long service life.
3.2 Structure of shaft seals:
L Packing gland seals;
L Pressure-reducing metal gland seals;
L Pressure-reducing rubber gland seals;
L Mechanical seals.
For example: A rubber volute liner and liners can be combined with an alloy impeller in operation, and a rubber impeller can be used together wit an alloy volute liner and liners.
4. Introduction of Type Selection
When the type selection is conducted, the performance curve table for clear water of a pump shall be referred to, and the coefficient of range for the flow selected is as follows:
4.1 M, AH type pumps
4.1. 1 For slurry of high density and strong abrasiveness, the coefficient of flow range will be 40-80%;
4.1. 2 For slurry of medium density and medium abrasiveness, the coefficient of flow range will be 40-100%;
4.1. 3 For slurry of low density and low abrasiveness, the coefficient of flow range will be 40-120%.
4.2 HH type pumps
4.2. 1 For slurry of medium density and strong abrasiveness, the coefficient of flow range will be 40-80%;
4.2. 2 For slurry of low density and strong abrasiveness, the coefficient of flow range will be 40-100%;
4.2. 3 For the highest efficiency point under a certain RPM condition, its corresponding flow rate will be 100%.
Techncial data of AH series centrifugal slurry pump:
|selection Chart and Performance|
|for more detailed specification and performance data , please contact us directly by email or call.|