Model NO.: DS/DK
Max.Capacity: >400 L/min
Impeller Number: Multistage Pump
Influent Type of Impeller: Single Suction Pump
Pump Casing Combined: Horizontal Split Pumps
Usage: Industry Field
Trademark: MODO pump
HS Code: 8413709990
Driving Type: Motor
Working Pressure: Middle Pressure Pump
Position of Pump Shaft: Horizontal Pump
Horizontal Pump: Centrifugal Pump
Transport Package: Wooden Case
The feature of Ds (DK) Two Stage Single Suction Split Case Pump
DS(DK) two stage split case pump, is a new generation of products combined the foreign technology and devoloped by our company after many years of research. It is the alternative to traditional section multistage pump. The fluid of DS pump is clean water, liquids containing a small amount of solid particles and corrosive liquid. It is mainly used for high-rise building water supply, industrial boilers, fire fighting, mine drainge, chemical, and avariety of industrial water systems.
The technology parameter of type DS pump:
Pump outlet diameter Dn: 80--300mm
Capacity Q: 100--1000m3/h
Head H: 160--320m
Temperature T: -20 degree celsius--150 degree celsius
Solid parameter less than 80mg/L
Working pressure less than 4Mpa
Description of pump type
E. G 100DS-150X2A
100--refers to outlet diameter (mm)
DS--refers to two stage split case pump
150--refers to head for one stage (m)
2--refers to the number of pump stage
A--Changed outer diameter of impeller (the max diameter without mark)
1. With two-stage impellers back to back in form, the axial force is balanced automatically. Cancelled the necessary balance disc of the multistage pump, the reliability of pump is greatly increased and the trouble rate of the pump is reduced. It especially adapts to the application of the pump speed changes and the concentrated liquid's viscosity.
2. Being short bearing span, it increases the rigidity of th shaft. The pump runs smoothly and quietly. It specially adaptts to the quiet situations.
3. Excellent hydraulic model, pump efficiency is higher than the multi-stage pumps with the same parameter, more energy saving and better environmental protection.
4. With the structure of horizontal split case and suction inle t& outlet located in the lower part of the pump case, the pump is convennient to maintain, no need to remove the motor and pipe when maintenance. Therefore, it reduces the maintenace time and cost.