Single Stage Centrifugal Pump / End Suction Pump for Irrigation & Drainage

Basic Info

  • Model NO.: IS100-65-250

  • Max.Capacity: 6-400m3

  • Impeller Number: Single-Stage Pump

  • Influent Type of Impeller: Single Suction Pump

  • Pump Casing Combined: Back Pull out

  • Impeller: Closed

  • Material: Cast Iron, Ductile Iron, Cast Steel

  • Application1: Clean Water Supply

  • Application3: Irrigation & Drainage

  • Application5: Sewage Water Transferring

  • Trademark: MODO

  • Specification: 6-400m3/h

  • HS Code: 8413709990

  • Max.Head: 110m-150m

  • Driving Type: Motor

  • Working Pressure: Middle Pressure Pump

  • Position of Pump Shaft: Horizontal Pump

  • Mounting Height: Suction Centrifugal

  • Usage: Pump, Pumps, Circulating Pump, End Suction Pump

  • Voltage: 380V/415V/440V/460V/3kv/6kv...

  • Application2: Civil Fire Fighting

  • Application4: Hot Water Transferring

  • Application: Petrochemical Liquid Transferring

  • Transport Package: Standard Export Wooden Packing

  • Origin: China

Product Description

Product Description

IS/IR/IY/IH/ZA/ZE series single stage centrifugal pump / end suction pump is used for transferring water or similar liquid without solid particales. The temperature of the liquid usually is 20 C-105 C. The maximum working pressure of the pump is 1.6MPa. This series single stage centrifugal pump / end suction pump is widely used in irrigation & drainage.

Performance range
Capacity Q: 6.3-400m3/h
Head H: 5-125m



Construction
The pump is single -stage single-suction overhanging centrifugal pump. The pump is back pull-out type.
It is unnecessary to disturb the inlet piping, outlet piping and pump casing, the impeller can be dismantled for maintenance.
The shaft seal adopts packing seal or mechanical seal according to customers' requirements.
The pump uses rolling bearings which get lubricated with dilute oil.



Material of flow passage components:
The single stage centrifugal pump / end suction pump could be customized with different material according to different using conditions, main material configuration followed :

Recommended Material Configuration (For reference only)
ItemClean waterDrink waterSewage waterHot waterSea water
Case & CoverGray iron (HT250)S.S304Ductile iron (QT500)Cast SteelDuplex S.S 2205
ImpellerGray iron (HT250)S.S304Ductile iron (QT500)2Cr13Duplex S.S 2205
Wearing ringGray iron (HT250)S.S304Ductile iron (QT500)2Cr13Duplex S.S 2205
Shaft & SleeveC.S 45S.S42040Cr40CrDuplex S.S 2205
Column PipeC.S Q235C.S Q235C.S Q235C.S Q235Duplex S.S 2205
Remarks: detailed material list will according to liquid and site conditions




Instruction of series single stage centrifugal pump / end suction pump  model
For example IS100-65-250
IS: Single stage centrifugal pump / end suction pump for clean water
IR: Single stage centrifugal pump / end suction pump for hot water
IH: Single stage centrifugal pump / end suction pump for normal chemicals
IY: Single stage centrifugal pump / end suction pump for oil
ZA: Single stage centrifugal pump / end suction pump for chemical under 200oC
ZE: Single stage centrifugal pump / end suction pump for chemical above 200oC to 400oC
100: Inlet diameter (mm).
65: Outlet diameter (mm).
250: Impeller diameter (mm).






Structure
The IS series single stage centrifugal pump / end suction pump overhanded horizontally mounted. The inlet located at the end side of the pump, the outlet located at upside. The pump has the features of compact structure, low noise and space-saving. The shaft seal can be either packing seal or mechanical seal.