Slurry Pump Submerged in Sump

Product Detail

Basic Info
  • Max.Head:50-80m

  • Max.Capacity:>400 L/min

  • Driving Type:Motor

  • Impeller Number:Single-Stage Pump

  • Working Pressure:High Pressure Pump

  • Influent Type of Impeller:Single Suction Pump

  • Position of Pump Shaft:Vertical Pump

  • Pump Casing Combined:Verticaljoint Surface Pump

  • Mounting Height:Suction Centrifugal

  • Impeller:Closed

  • Usage:Pump

Product Description
slurry pump submerged in sump

Product Description:
slurry pump is vertical single-stage single suction cantilevering centrifugal pump structure. the impeller is semi-open. there are mixing blades in the extension of suction part.

this series of pump can be used for environment protection, municipal engineering, thermal power station, coal coking plant, refineries, steel works, mining, paper industry, cement plants, foodproduct factories and textile printing and so on. It can also be used
for suction of thick liquid, viscous oil, dregs of oil, dirty liquid, slurry,mortar, quicksand, flow sludge in the city's sewerage system, sediment fluid slag material and corrosive liquids.

Structure Specification:
Our sump pump is the cantilever pump structure of single stage and single suction, with the bearing housing, supporting, intermediate pipe connecting the pump hydraulic components, the water is
discharged out from the drain pipe parts, pump impeller is for semi-shrouded with the agitating vane on the vane extended, the main characteristic of this pump is the underwater pump shaft parts have enough rigidity, the impeller and pump shell have no bearings, no shaft seal, which can transport the greater medium of solid particles. the length of inserting the water by pump is between 800 and 2500, the suction pipe can be matched in case of need. the shaft seal runs into the underwater pump without setting up the shaft seal, drive should be installed the vertical motor on the supporting seat connecting with coupling and pump.

Contact us for quotation & technical data.