Product features of slurry pump wear abrasion resistant repair paste epoxy coating: 1.With excellent performance of abrasion resistant and corrosion resistant 2.Construction is convenient,without very high technology requirements for the constructors 3.Suitable for the repairing and protecting of heavy medium erosive wear working condition
How to use of slurry pump heat abrasion corrosion resistant protective epoxy compound paste coatings: Configure: according to the weight ratio or volume ratio 3:1,make the A and B two components mix uniformly,then use it up within 30 min Generally while it’s construction and configuring adhesives, every time the largest configuring quantity should not be more than 2kg, too much adhesive is solidified too fast, hasn’t been used up until partial adhesive has been solidified and can’t be used If the temperature is low,you can properly heat up the A component to reduce viscosity for easy to configure
Coating: when the primer just initial curing,make mixed-up material spread coating on the pending-repair area layer by layer, compress the coating to be solid, the suitable coating thickness is 4-10mm, the most thickness can be 30mm, repair the surface to be smooth after the coating coat in the suitable size, this material can’t do machining, should pay attention to controlling the coating thickness to avoid appearing interference phenomenon in the assembly
Packaging specification of slurry pump wear abrasion resistant paste epoxy coatings: 20Kg/group,packed in a plastic drum A component: 15Kg/drum, B component: 5Kg/drum
Transportation storage: Sealed storage in the cool and dry place The warranty period is 1 year Avoid placing it upside down, knocking against and transporting it as a non-dangerous product during transportation
