Model NO.: Type MQV
Trademark: MODO PUMP
Pressure Medium: Water
Position of Pump Shaft: Vertical Edge
Size: as Per Model
HS Code: 8413709990
Basic information of our multistage pump
Max casing pressure; Up to 48bar
Position of pump shaft; Vertical pump
Flow; up to 360m3/hour (1600 GPM)
Head ; up to 500m (1640feet)
Max water temperature; 120 degree celsius
Material ; cast iron, stainless steel
Frequency; 50hz, 60hz
Market; Europe, USA, Middle east, Australia.
Pump size; 1.5" - 5"
OEM and ODM ; available.
Impeller no; Multistage pump
IMpeller; closed type.
size discharge (mm) suction(mm) ,capacity (m3/h)
MQ40A 40mm 65mm 30(50hz),36(60hz)
MQ40B 40mm 65mm 42(50hz),50(60hz)
MQ65A 50mm 65mm 70(50hz),80(60hz)
MQ65B 50mm 65mm 90(50hz).110(60hz)
MQ100A 100mm 125mm 150(50hz),180(60hz)
MQ100B 100mm 125mm 200(50hz),240(60hz)
MQ125A 125mm 150mm 240(50hz),280(60hz)
MA125B 125mm 150mm 300(50hz) 360(60hz)
Pure as well as slightly contaminated media
such as cold and hot water (temperature
up to 120 degree Celsius.) ,condensate, oil
suspensions ,acids as well as their watery solutions
,caustic solutions and brine
osmosis and ultra filtration
spray water system
Vertical Multistage pump introduction TYpe MQV.
We introduce this pump technology from Europe.
with vertical close coupled design using standard IEC
motors up to 90 degree, the pump shaft is directly
coupled to themotor shaft.
vertical design with separate thrust bearing and
felxible coupling between motor and pump shaft.
standard IEC motors for 90kw and larger
Vertical close coupled design
Standard motor according to IEC,design V1, up to 90kw
Non flexible coupling between pump and motor
All axial forces taken up by motor earings.
Medium lubricated slide bearing in suction casing
Maintenance firedly design. shaft sealing maintainable
without pump disassembly.
Vertical configuration with separate thrust
bearing, grease lubricationw ith grease nipples
Standard motor according to IEC,d esignV1,90kw
Flexible coupling between pum and motor
Medium lubricated sleeve bearing in suction
Maintenance freindly design , shaft sealing maintainable
without pum disassembly.
Pump with more than one discharge-multioutlet design;
Multistage pumps in Multioutlet design can be fitted
with a random number of discharge branches. the pumps
are mostly used infire fighting applications to serve different
pressure zones with different pressure levers.
Mulitoutlet configuration are available for all horizontal and
vertial MQ design.