Acid Resistant Waste Slurry Chemical Pump
The sump slurry pumps are designed for vertical cantilever type with single casing, double suction and semi-open impeller design. The impeller is made of high-chromium alloy or rubber. The gap between impeller and liner is adjustable, to assure the high-efficient operation. This series of sump slurry pumps do not need any shaft seal, and the wet parts of pumps are made of rubber and the parts contacting with slurry are lined with rubber. The vertical sump pump can be used to deliver corrosive slurries. The pump may be driven by belt or direct coupling. It should rotate clockwise viewing from the drive end.
Outlet diameter: DN=40-200mm(1.5"-8")
Matched power: P=1.1-160kW
Working Temperature: Less than 80º C
SP pumps are vertical, centrifugal slurry pumps submerged in sump to work.
They are designed for delivering abrasive,large particle and high density slurries.
These pumps have no need of any shaft seal and sealing water.
They can also be operated normally for insufficient suction duties.
Wet parts of type SP pump are made of abrasion-resistant metal.
All parts of SP(R) pump immersed in liquid are lined with rubber outer liner.
They are suited to transport non-edge angle abrasive slurry.