We have many pumps could be used for mining,today let us talk about the horizontal slurry pump for mining.
The model from 1.5/1 to 16/14 are all available,spare parts also,which all could interchangeble with Warman.
Specification of pump for mining:
Rubber Pumps Material for mining | Metal Pumps Material for mining | ||||
No | Part | Material | No | Part | Material |
1 | Base | Cast Iron | 1 | Base | Cast Iron |
2 | Shaft | 4140 High Tensile Steel* | 2 | Shaft | 4140 High Tensile Steel* |
3 | Bearing Assembly | Timken (Cast Iron Body) | 3 | Bearing Assembly | Timken (Cast Iron Body) |
4 | Shaft Sleeve | 420 Stainless Steel | 4 | Shaft Sleeve | 420 Stainless Steel |
5 | Pump Casing | Cast Iron | 5 | Pump Casing | Cast Iron |
6 | Frame Plate Liner Insert | Rubber | 6 | Frame Plate Liner | 27% Chrome White Iron |
7 | Cover Plate Liner | Rubber | 7 | Volute Liner | 27% Chrome White Iron |
8 | Impeller | Rubber Coated High Tensile Steel | 8 | Impeller | 27% Chrome White Iron |
9 | Throat Bush | Rubber | 9 | Throat Bush | 27% Chrome White Iron |
10 | Cover Plate | Cast Iron | 10 | Joint Rings | Rubber |
11 | Stuffing Box | Cast Iron | 11 | Cover Plate | Cast Iron |
12 | Expeller | 27% Chrome White Iron | 12 | Stuffing Box | Cast Iron |
13 | Expeller Ring | Natural Rubber | 13 | Expeller | 27% Chrome White Iron |
14 | Bolts | Zinc Plated Steel | 14 | Expeller Ring | Natural Rubber |
15 | O-rings | Nitrile Rubber | 15 | Bolts | Zinc Plated Steel |
16 | Seals | Rubber | 16 | O-rings | Nitrile Rubber |
17 | Seals | Rubber | 17 | Seals | Rubber |
Application Photos of pump for mining:
These slurry pumps are for an ore mine in Romania.We work out the whole solution for our client.
As we all know we should select the slurry pump for mining usage based on client's requirement&the most important,the working condition.
Improper selection and use of pump for mining.
The effective NPSH of pipeline of pump for mining is less than the necessary NPSH of pump, resulting in cavitation. Please refer to the cavitation of slurry pump for mining for adjustment.
What should we do if there has some problems of pump for mining rotor
The dynamic and static balance of impeller is not well done
The triangle pulley of the slurry pump for minig is unbalanced
The bearing bracket is not concentric and the bearing body needs to be replaced
The pump shaft for mine is bent. If it is bent, it needs to be straightene.
My name is Miya and I love my work.Trust I could assist you to get suitale pump for mine.
5. Improper selection and use of slurry pump
The effective NPSH of pipeline is less than the necessary NPSH of pump for mining, resulting in cavitation. Please refer to the cavitation of slurry pump for minig for adjustment
The head of the selected slurry pump for mining is higher than that of the pipeline device, and cavitation is caused by the operation of the pump for mining with a large flow, so the speed of the pump should be reduced or the impeller of pump for mining should be cut.
My name is miya and I worked this pump industry for 6 years.Hope my rich experience could help you to get suitable pump for mining usage.
Email me now:
