submersible sand dredging pump
MSS submersible slurry pump can remove the fluid shall less than 100 ºC. According to customers requirements, which can add thermal overload protection and water detection device, which can be working safely in harsh environment for long time.
MSS series of submersible slurry pumps have been very popular among customers since launching into domestic markets.
Features:
Compared with common slurry pumps, this series of products have many advantages as follows:
1. No limitation on delivery heads, high efficiency, and thoroughness in removing sewage.
2. No auxiliary vacuum pumps is required, bringing down the cost of ownership.
3. No auxiliary agitating device is required, thus enabling easier operation.
4. No complex ground protection or fixation device is needed for fastening the motor in water, thus allowing for easier installation and maintenance.
5. As the agitating impeller is in direct contact with the surface of sediments, the fluid density can be controlled by the submerged depth, thus enabling easier control of density.
6. The device is submerged in water to work, thus producing no noise or vibration, and making the work site cleaner.
·Usage: | Slurry, Water & Sewage |
·Type: | MSS Submersible Slurry Pump |
·Capacity | Up to 2400 m3/hr (666L/S) |
·Head | Up to 60 m ( 196 feet ) |
·Speed: | Up to 1480 rpm |
·Discharge: | 80-400mm (3.15’’ up to 16’’) |
·Temperature | Max.: 80℃ |
·Drive | Hydraulic or Electric |
·Shaft | 420 Stainless Steel |
·Shaft Sleeve | 420 Stainless Steel |
·Bearing Covers | Cast Iron |
·Back Plate | 27% Chrome White Iron or 316 Stainless Steel / Duplex1 |
·Agitator | 27% Chrome White Iron or 316 Stainless Steel / Duplex1 |
·Motor Mechanical Seal | 304 Stainless Steel |
·Pump Casing | 27% Chrome White Iron or 316 Stainless Steel / Duplex1 |
·Impeller | 27% Chrome White Iron or 316 Stainless Steel / Duplex1 |
Recommended Products