Big Capacity Mixed Flow Pump
General Information
HW type big capacity horizontal mixed flow pump is horizontal, single-stage, single suction, volute type mixed flow pump. It is suitable for conveying clear water or other liquids with physical and chemical properties similar to water. The temperature of the liquid to be transported is not higher than 50 ℃. It is widely used in farmland irrigation, industrial and urban water supply and drainage.
Pump structure
It is composed of HW inner packing and packing ring to prevent water from flowing out of pump. The shaft sleeve is used to protect the pump shaft. It can be replaced in time after wear.
The pump shaft is supported by a single row radial ball bearing. Bearings can be lubricated with lubricating oil - the amount of oil should be controlled between the marks of oil posts: grease can be used for lubrication - it can be added when the water pump is assembled. In use, the front cover and the rear cover are disassembled to supplement.
The screw hole at the upper end of the pump body is used for filling water or connecting vacuum pump for pumping water.
In order to expand the application range of the pump and meet the different requirements of users, the outer diameter of impeller can be cut or impeller with different performance can be replaced, (indicated by letter "a" etc.)
The accessories of HW mixed flow pump include elbow, bottom valve, pulley or coupling, etc.
General Application
l Agricultural irrigation
l Drainage
l Industrial water supply
l Municipal water supply
Operating Data
Flow Rate(Q) | 70~9000 m3/h |
Head(H) | 4~22m |
Speed | 2900rpm/1450rpm/980rpm/730rpm/580rpm/485rpm |
Max Temperature | 50℃ |
Conveying Medium | Clean water or liquids similar to clean water in physical property |