IS series single-stage end-suction (axial intake) centrifugal pump is an energy-saving pump designed by teamwork in the whole nation, it is improved on a basis on model BA, B and other single-stage water centrifugal pump. The advantages: its hydraulic capability is distributed reasonably, wide option for user, conveniently check and repair, the efficiency and throw is up to advanced international level. This pump is suitable for industrial and city water supply, water drainage, and widely used for agricultural irrigation, transportation pure water or other liquids whihc physical and chemical nature is similar to pure water, and the temperature should not be higher than 80 °C.
Model:IS200-150-250 Flow: 200m3/hr Material: Casing: Cast rion |  |
Contact vicky@modopump.cn for prices!
IS 80-65-160 A
IS--- Single-stage end - suction pump
80—Inlet diameter (mm)
65—Outlet diameter (mm)
160—Nominal diameter of impeller (mm)
A—Impeller cutting mark
Model | Speed | Capacity Q | Head | Efficiency | Power(N)(kW) | NPSHr | Weight | ||
n(r/min) | m3/h | L/S | H (m) | η (%) | Shaft power | Motor power | r(m) | w(Kg) | |
IS50-32-125
ISR50-32-125
| 2900
| 7.5 | 2.08 | 22 | 47 | 0.96 | 1.5 | 2.0 | 32.5 |
12.5 | 3.47 | 20 | 60 | 1.13 | 2.0 | ||||
15 | 4.17 | 18.5 | 60 | 1.26 | 2.5 | ||||
1450 | 3.75 | 1.04 | 5.4 | 43 | 0.13 | 0.55 | 2.0 | ||
6.3 | 1.74 | 5 | 54 | 0.16 | 2.0 | ||||
7.5 | 2.08 | 4.6 | 55 | 0.17 | 2.5 | ||||
IS100-80-160
ISR100-80-160 | 2900 | 60 | 16.7 | 36 | 70 | 8.42 | 15 | 3.5 | 63 |
100 | 27.8 | 32 | 78 | 11.17 | 4.0 | ||||
120 | 33.3 | 28 | 75 | 12.2 | 5.0 | ||||
1450 | 30 | 8.33 | 9.2 | 67 | 1.12 | 2.2 | 2.0 | ||
50 | 13.9 | 8.0 | 75 | 1.45 | 2.5 | ||||
60 | 16.7 | 6.8 | 71 | 1.57 | 3.5 | ||||
IS125-100-315
ISR125-100-315 | 2900 | 120 | 33.3 | 132.5 | 60 | 72.1 | 110 | 4.0 | 178 |
200 | 55.6 | 125 | 75 | 90.8 | 4.5 | ||||
240 | 66.4 | 120 | 77 | 101.9 | 5.0 | ||||
1450 | 60 | 16.7 | 33.5 | 58 | 9.4 | 15 | 2.5 | ||
100 | 27.8 | 32 | 73 | 11.9 | 2.5 | ||||
120 | 33.3 | 30.5 | 74 | 13.5 | 3.0 | ||||
IS200-150-250
ISR200-150-250 | 1450 | 240 | 66.7 | 21.5 | 71 | 19.8 | 37 | 3.5 | 180 |
400 | 111.1 | 20 | 82 | 26.58 | 4.3 | ||||
460 | 127.8 | 17.5 | 80 | 27.4 | 5.0 | ||||
IS250-200-315 ISR250-200-315 | 1480 | 380 | 105.6 | 35.5 | 71 | 51.8 | 75 | 5.5 | 380 |
630 | 175 | 32 | 84.5 | 65.0 | |||||
760 | 211.1 | 29 | 84 | 71.5 | |||||
1. What is your product range?
Slurry pumps(Horizontal, vertical, submersible type.)
Water pumps(Multistage, end suction, double suction)
2. What information I need to offer for quotation?
Liquid:___ Pump Capacity___m3/h
PH:_____ Pump Head: ___m
Specific of gravity___ Voltage ___V Frequency ___Hz
3. Do you only supply pumps? Could you supply driven equipment?
Yes, sure ,the pumps could be coupled with motor and diesel engine, below brands for your reference:
Motor: WEG, SIMENS ,ABB, TECO ,and Chinese brands
Diesel engine: Cummins, Deutz, Perkins,Volvo,MITSUBISHI, Caterpiller,MTU,and Chinese brands.
4. What is your MOQ?
We value every client, no matter pump or spare parts, one set or one piece, we treat the same with 100sets.
5. Is OEM parts available ?
Yes, please send me the detailed drawing. Different materials is available.
