MIS End Suction Water Pump
Size (discharge): 25mm to 450mm
Capacity: 3.4~ 1200 m3/hr
Head: 6m ~ 135 m
Efficiency:Up to 92%
Materials:Cast iron,SS 304,SS 316,Bronze etc.
MIS End Suction Water Pump Introduction
MIS End suction Water pump is horizontal single stage end suction centrifugal pump, it transport the clean water or other liquids with similar physical and chemical properties as clear water and applicable for industrial and city water supply and drainage as well as for the agricultural irrigation and drainage.MIS end suction pump designed by the performance and size according to international standard IS02858, its technique standard is close to the international standard and reach international advanced level.
MIS End Suction Water Pump Features
1.Choice of piston ring style labyrinth
2.Fully interchangeable with the common brand reducing inventory hold requirements
3.A full range of mechanical seal adaptations available upon request
4.Oil lubrication or packed grease
5.Painted to customer specifications upon request
• Have the pumps’s installation height, the pipeline length and diameter and the flowrate comply with the calculations and try best to reduce unnecessary loss.
• Use a bigger pipeline diameter for a distance transportation. The pump pipeline should have a stand of its own and do not let the pipeline weight upon the pump to avoid it from pressed damage.
• Mount the check value outside of the gate value on the drain-out pipeline if required to mount it.