Back Pull Out Centrifugal Water Pump
The ISA 80-32G centrifugal water pump is high head end suction water pump made of cast iron, to transfer clear water or liquids which are similar to clear water. This pump complies fully to the European Standard BS EN733 / DIN24255 of performance and dimensions.
The pumps are of single stage with back pull out type suitable for 3500 rpm. These are either gland packed or mechanically sealed and delivery size can be up to 125 mm. These are very useful in air conditioning, water supply, fire-fighting and booster services.
Product descrption:
1.Totally open impeller,high efficiency,light in weight ,small axial force,and the life the driving component.
2.It is easy to maintain and the chance for blocking is very little.And it can transmit media with a certain volume of gas.
3.The impeller was precision cast.Tested with Class G6.3 dynamic balance,it can run smoothly.
Fillin seal: need a high temperature washing pipe
It is easy to maintain, and replace.
Single face mechaical seal,used for pulp below the thickness of 4.5%.
Double face mechanical seal, used for harsh media and corrosive media. It can make sure that there is no leakage.Need the high temperature water stel.
Typical Applications
Air conditioning
Fire fighting
Booster services
Water supply
Sprinkler system
Handling clear and turbid water up to 3000 ppm
Features
Confirming to DIN 24256 and ISO 2858
Single stage with back pull-out type design
Suitable for 3500 rpm
Gland Packed / Mechanical Seal
Material
Casing | Cast Iron standard, Ductile Iron, Stainless Steel optional |
Impeller | Bronze standard, Cast Iron, Stainless Steel optional |
Shaft | ASTM420 standard, ASTM304, ASTM316, ASTM1045 optional |
Shaft Seal | Mechanical Seal standard (Carbon-Ceramic/Viton standard, Caron-Sic/Viton optional) , Gland Packing optional |