Stainless steel end suction water pump
The ISO100X65-250 Stainless steel end suction water pump is back-pull-out design centrifugal pump type. The 2 pumps are the second order from the customer. In 2019, this customer sent us any inquiry about the end suction pumps. While he didn’t give details of the liquid, the cast iron pumps are not suitable and ate up quickly. So we commended the stainless steel pumps to him this time.
The advantage of stainless steel 316 end suction water pump:
1, Corrosion resistance
Because of the addition of Mo element, the corrosion resistance and high temperature strength of 316 stainless steel are greatly improved. The high temperature resistance can reach 1200-1300 ℃, and it can be used in the condition of cauku.
The corrosion resistance of 304 stainless steel is better than that of 304 stainless steel. It has good corrosion resistance in the production of pulp and paper. Moreover, 316 stainless steel is also resistant to marine and corrosive industrial atmosphere.
2, Heat resistance
316 stainless steel (06cr17ni12mo2) has good oxidation resistance when it is used discontinuously below 871 ° C (1600 ° f) and continuously above 927c (1700 ° f). In the range of 427 ° c-857 ° C (800 ° f-1575 ° f), it is better not to use 316 stainless steel continuously, but when using 316 stainless steel continuously outside this temperature range, it has good heat resistance. The carbide precipitation resistance of 316L stainless steel is better than that of 316 stainless steel, and the above temperature range can be used.
The main performance of the 2 stainless steel end suction water pump:
Pump type | Horizontal, centrifugal , end suction water pump | ||
Model | ISO100X65-250 | Power | 75kw |
Capacity | 150m3/hr | Speed | 2900rpm |
Head | 95m | Voltage | 380V |
Efficiency | 78% | Frequency | 50HZ |
Parts | Material |
Casing | Stainless steel 316 |
Impeller | Stainless steel 316 |
Impeller nut | Stainless steel |
Shaft | SS420 |
Bearing | NTN brand |
Shaft seal | Mechanical seal |