Horizontal water pump with Siemens Motor
7 sets of Horizontal water pump with Siemens Motor are finished before the Lunar New Year.
These water pumps are back-pull-out design, which allows for the maintenance of the pump without removing the pipe work connected to the casing, or the pump alignment.
The main data of the water pump sets are as below:
Pump type | End suction horizontal water pump | ||
Model | ISA80-20 | Power | 11KW |
Capacity | 175m3/hr | Speed | 1750RPM |
Head | 20m | Voltage | 460V |
Efficiency | 80% | Frequency | 60HZ |
Parts | Material |
Casing | Cast iron |
Impeller | Cast iron |
Impeller nut | Cast steel |
Shaft | C45 |
Shaft sleeve | 2Cr13 |
Shaft seal | Packing seal |
All these water pumps are equipped with Siemens motors. The motors are CE certificated, newly designed high efficiency low voltage three phase asynchronous motor. The housing material is cast iron, designed for continuous duty operation (S1).
The motors for these pumps are 460V/60HZ/4P motors, can operated at ambient temperature from -15’C to 40’C and at altitudes of up to 1000m above sea.
We can offer other brands motors for our water pumps. If any request, please feel free to contact Vicky@modopump.cn or call directly +86 158 3083 1733.
