MD Multistage Water Pump Series
Diesel engine multistage pump is composed of diesel engine and multi-stage pump. It has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long service life and convenient installation and maintenance. It is used for conveying clear water or other liquids with physical and chemical properties similar to water. It can also be used to transport hot water, oil, corrosive or abrasive medium by changing the material and sealing form of the flow passage parts and adding cooling system.
Service conditions of diesel engine pump set:
1) Ambient temperature ≤ 50 ℃, medium temperature ≤ 80 ℃,
2) The medium weight is not more than 1240 kg / m3.
3) The liquid level must be higher than the pump inlet, no liquid idling is allowed
4) If the liquid level is lower than the pump, it is recommended to add an additional set of vacuum auxiliary system.
5) If the diesel engine fire pump group needs mobility and flexibility, we can also make it into a fully automatic remote control 4-wheel trailer, which can walk freely without dragging.
|1. Water supply||7. Circulation|
|2. Booster system||8. Industries|
|3. Condensate||9. Agricultural|
|4. Heating & air conditioning||10. Fire fighting system|
|5. Irrigation||11. Seawater pumping|
Please check the model D25-50x5 for mining:
1. Material are each of parts.
|Impeller||Cast iron||Shaft sleeve||Carbon steel|
|Diffuser||Cast iron||Balance disc||2Cr13|
|Shaft seal||Gland packing||Balance ring||2Cr13|
2. Pump paremeters.
|Pump specification||Motor specification|
D type Multistage pump is widely used, such as mine drainage, factory and urban water supply booster system. It is will be appreciated to contact us if you needed.
Phone&Linkedin : +8618722158480