Horizontal Boiler Multistage Pump

‚ÄčThe MD series horizontal boiler water multistage centrifugal water pump single suction centrifugal water pump. The horizontal multistage pump is efficient , reliable, and durable with low noise performance, easy maintenance and wide scope of usages.

Product Details

The MDG horizontal multistage boiler feed pump adopts the hydraulic model of high efficiency and energy-saving products recommended by the state. Therefore, DG boiler feed pump has high efficiency and wide performance range, which better meets the requirements of users. While oily and corrosive or solid contained fluid can be pumped by means of material modification, sealing methods, and cooling system. It is especially suitable for industrial boiler water supply and drainage, cooling water transportation, etc.


200DG43X5 (5)

Quick Details

  • Place of Origin: Hebei, China (Mainland)

  • Brand Name: Modo

  • Model Number: MDG

  • Theory: Centrifugal Pump

  • Structure: Multistage Pump

  • Usage: Water

  • Power: Electric

  • Standard or Nonstandard: Standard

  • Fuel: Motor

  • Pressure: High Pressure

  • Application: clean water/sea water/Boiler feed/hot water

  • Water Pump Material: Cast Iron/Cast steel/Stainless Steel

  • Lubrication: Grease and Oil

  • Color: Customer specifications upon request

  • Product name: pump water supply

  • Voltage: 50Hz/60Hz

  • Certificate: ISO9001:2008

  • Water Pump Applications: Mine/Boiler feed/Urban water system

  • Pump Speed: 1450RPM/2980RPM

  • Pump Type: multistage pump

  • Item Name: Motor water pump water supply pump pump


Packaging & Delivery

Packaging Details:

High Quality Motor Water Pump Water Supply Pump:
Packaged by Ply wonden case/ As customer required

Delivery Detail:

Shipped in 12 days after payment


High Quality Motor Water Pump Water Supply Pump

Welcome to Modo Pump Co., Ltd.


MD series high pressure water pump coupled with diesel engine: 62966.png
5 sets 343kw 300m head high pressure water pump ready for shippment:

63168.png

  

Common fault analysis

  1. How to avoid cavitation. Replace the worn impeller and select the motor matching the pump. The speed is too low. Solution: check whether the wiring of the motor is correct, whether the voltage is normal or whether the steam pressure of the turbine is normal.

  2. The system head is too high. Solution: check the water head of the system, especially the friction loss. 

  3. Suction head is too high. Solution: check the net head of the existing self-priming pump. If the inlet pipeline is too small or too long, it will cause great friction loss.

  4. Impeller or pipeline blocked. Solution: check for obstructions.

  5. It turns in the wrong direction. Solution: check the direction of rotation.

  6. Air is produced or there is leakage in the inlet pipeline. Solution: check the inlet line for cavitation and / or air leakage.


For DG type boiler feed multistage water pump, the specific problems are analyzed in detail. For slight vibration, stiffness can be increased to eliminate it. For ceramic valve, if the spring with large stiffness is selected, piston actuator structure is used, and severe vibration of pipeline and base is eliminated by adding support; the frequency of valve selection is the same as that of system.




Send Inquiry

You Might Also Like