5000m3/h water pump high flow low head water pump
S-type single-stage double suction split centrifugal pump (formerly known as SH type) uses double suction impeller, and the pump can be split in the middle, so it is called double suction split centrifugal pump. It is a kind of pump developed by our company's technical personnel after absorbing foreign technology and combining the user's usage habits and difficulties. For pumping clear water or other liquids with physical and chemical properties similar to clear water. The temperature of transported liquid is required to be ≤ 80 ℃. Standard packing seal, optional mechanical seal. Because it can be split in the middle, maintenance is very convenient. Deeply loved by the majority of users. And our company has also developed a new generation of sow double suction axially split centrifugal pump, with better hydraulic model and higher efficiency, which can be selected by the majority of users.
• Impeller with static balance is fixed onto the shaft by the sleeve and sleeve nuts on the two sides. Its axial position of low head water pump can be adjusted through sleeve nut.
• Pump shaft is supported by two single-row radial ball bearings. The bearings are placed inside the bearing body, Mounted at teh two ends of the low head water pump. and lubricated by grease.
The low head water pumps mainly used for water supply and drainage in factories, mines, cities and electric stations, waterlogged land drainage, irrigation of farming land and carious hydraulic projects etc.
Clean water/Sea water
MS Double Suction Water Pump
68 m3/hr to 30000 m3/hr
6 m to 230 m
Diesel or Electric