China Horizontal split case water pump
The China Horizontal split case water pump is energy-saving, single-stage, double-suction centrifugal water pump. This centrifugal double suction pump adopts the national standard design, the pump series, standardization, high degree of generalization, at the same time, in the design of a new material, new structure, can be used for a variety of media delivery.
Flow: 485 m3/hr
Head: 24 m
NPSHr: 3.5 m
Rotation: Clockwise from the driven end
Suction diameter: 250mm
Discharge diameter: 200mm
The Horizontal split case water pump for factories, mines, urban water supply, power plants, farmland irrigation and drainage and various water conservancy projects.
Widely used in urban water supply and drainage, urban water supply; petrochemical refineries, paper mills, thermal power plants, power stations and other water supply and drainage;
The impeller and the pump shaft are the rotating parts of the centrifugal pump. The pump housing and the pump base are the fixed parts of the centrifugal pump. There are three delivery parts for the rotating part and the fixed part: the shaft sealing device between the pump shaft and the pump housing is called packing box ; Leakage between the impeller and the inner wall of the pump casing at the leakage device is called a leak ring; rotary connection between the pump shaft and the pump base is called a bearing seat.
The function of the pump base is to support and fix the pump housing. Centrifugal pump base with flange holes, used to be fixed with the base plate or foundation. The top of the pump housing is filled with water and deflation screw holes to allow water to be filled and drained before the pump starts. In the water pump suction cone and pressure cone on the installation of the vacuum gauge and pressure gauge installed on the screw hole, the bottom of the pump shell drain tap, so that when the pump is stopped for maintenance, to drain the pump shell water.