The XS type pump is split case pump , a new double suction pump. It can be vertical installation and horizontal installation as your order.
1. Our Main Performance Parameters of Horizontal Split Case Pump:
● Pump outlet diameter | DN: 80~900mm |
● Capacity | Q: 22~16236m3/h |
● Head | H: 7~300m |
● Temperature | T: -20℃~200℃ |
● Solid parameter | ≤80mg/L |
● Permissible pressure | ≤5Mp |
2. The Horizontal Split Casing Construction Drawings:
3. XS Type Hohrizontal Split Case Pump Material Supporting Program:
Item | Pump Supporting program H | Pump Supporting program Q | Pump Supporting program B | Pump Supporting program S | |||
1 | 2 | 1 | 2 | 3 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2CR13 | 2CR13 | 2CR13 |
| #45 steel |
|
|
| 1Cr18Ni9Ti | 1Cr18Ni9Ti | 1Cr18Ni9Ti |
|
|
|
|
| Tin bronze | Tin bronze | Tin bronze |
Services | For pure water and lower strength requirements | For pure water and high strength applications | For media with more solid impurities, PH<6 chemical corrosion and for high strength applications | The sea water pump | |||
These configurations are recommended by the manufacturer,customers could change their materials according to specific needs. |
4. XS Type Hohrizontal Split Case Pump Structure Features:
▶The water inlet and outlet are in the same straight line, the same rotor can run in reverse direction, the support distance between the two ends of the water pump is short, the operation of the pump is stable, the vibration and noise are small, and the speed can be increased appropriately, so that the water pump can be used in a wider range. |
▶The middle bracket, thickened pump body, sealed cooling and bearing thin oil lubrication can be used for the water pump, so that the water pump can be used in the operation situation up to 200 ℃, which is very suitable for the requirements of heating pipe network. |
▶The pump body can be installed vertically or horizontally according to the change of service conditions, and mechanical seal or packing seal can be used. |
5. Successful example
The below goods pictures are our Malaysia customer's return order, including 2 pieces of pump with motor, 2 pieces of bare shaft pump, couplings and guards. The model is XS150-290 used for drainage project. We change the material as custome request.
|
If this is the one you pefer, please feel free to contact us without any hesitation.
Email:smile@modopump.cn
Whatsapp & Skype:+8618722158480